Write My Paper Button

WhatsApp Widget

5013FTE Internal Combustion Engine Simulation Report: Vehicle Systems and Development, Assignment, CU, UK

Assignment Task

By using 1-D simulation software “GT POWER v 2023”, the aim of this coursework is to study the engine performance characteristics by changing design parameters. A written report addressing the results from the following tasks:

Task 1. 10% of the assignment mark

Simulate a GT-POWER engine model “v2023_TASK1_5013FTE1cylSI” provided in AULA to produce baseline results. Plot and discuss relevant engine performance indicators of your choice such as Volumetric Efficiency, BMEP, BSFC and discuss links between them. The engine must be simulated from 1000rpm through to 8000rpm. Discussion of the results including links between the various engine performance indicators should be also included in the report.

Task 2. 20% of the assignment mark

Modify the engine intake runner length to 400mm and exhaust runner length to 100mm. Name the model as “v2023_TASK2_5013FTE1cylSI”. You must keep the rest of components of the model as standard this includes the runner diameter and other parameters. Then run simulation from 1000rpm through to 8000rpm and compare performance with baseline in Task1. Discuss the relation between the modification applied and overall engine performance characteristic changes.

Do You Need Assignment of This Question

Task 3. 20% of the Assignment 1 coursework mark

In the model “v2023_TASK2_5013FTE1cylSI”, alter combustion duration (def=10 to 90%) to 20deg and Anchor angle (def = 50% burn) to 6deg. Name the model as v2023_TASK3_5013FTE1cylSI”. You must keep the rest of components of the model same as the TASK2 model. Then run simulation from 1000rpm through to 8000rpm and compare with TASK2. Discuss the performance changes using relevant engine performance indicators (additional performance indicators may be required to suitably discuss the changes).

Task 4. 20% of the Assignment 1 coursework mark

Change the TASK3 model to Direct Injection fuelling system. Name the model as “v2023_TASK4_5013FTE1cylSI”. You must keep the rest of components of the model same as the TASK3 model. Then run simulation from 1000rpm through to 8000rpm and compare with TASK3. Discuss the performance changes using relevant engine performance indicators (additional performance indicators may be required to suitably discuss the changes).

Task 5. 30% of the Assignment 1 coursework mark

Tasks 1-4 rely on simulation to predict engine performance. In the real world simulation predictions are also tested with single cylinder engines on an engine dynamometer (test bed) to give empirical validation to the results. As a powertrain development engineer you would be required to inform the applications group how and what you specifically want to test and what data you require. Analyse and discuss what modifications to the base hardware and software would be required to create these empirical dyno tests and what would be required to measure the performance indicators you have discussed above to validate your simulations. This should include a description of all the required sensors and actuators (including type and some reasoning why) and a discussion of which aspects of engine control strategy should be modified for each task above

Assessed Module Learning Outcomes

The Learning Outcomes for this module align to the marking criteria which can be found at the end of this brief. Ensure you understand the marking criteria to ensure successful achievement of the assessment task. The following module learning outcomes are assessed in this task:

1. Develop and apply knowledge and understanding of scientific principles and methodology necessary to underpin their education in vehicle systems and related engineering disciplines, to enable appreciation of its scientific and engineering context and to support their understanding of future developments and technologies.

2. Apply a systems approach to vehicle engineering problems.

3. Apply knowledge of characteristics of particular equipment, processes or products and the use of technical literature and other information sources.

4. Demonstrate engineering workshop and laboratory skills.

Are You Looking for Answer of This Assignment or Essay

The post 5013FTE Internal Combustion Engine Simulation Report: Vehicle Systems and Development, Assignment, CU, UK appeared first on Students Assignment Help UK.

Scroll to Top