Write My Paper Button

For faster services, inquiry about  new assignments submission or  follow ups on your assignments please text us/call us on +1 (251) 265-5102

    Write My Paper Button

ECE5882 Design a small-signal midband (for audio signal 20 Hz-20 kHz) common-emitter (CE) amplifier: Advanced Electronic Design Assignment, MU, Malaysia

ASSIGNMENT
AMPLIFIER DESIGN

1. Design a small-signal midband (for audio signal 20 Hz-20 kHz) common-emitter (CE) amplifier with a BJT transistor having β of 120 and VBE of 0.7 V. The DC bias is provided by the voltage-divider configuration. The available dc voltage supply is +25 V. The amplifier has the overall voltage gain (with load) of
AVLoad  60 and maximum output voltage swing with no distortion or clipping. An AC output signal from an audio microphone, vs of 20 mVpp needs to be amplified. A source resistance, RS of 2 kΩ is used at the input side (to facilitate the measurement purpose of the input resistance). The amplifier output is connected to a load, RL of 3 kΩ.

You need to determine all the resistors values of the bias circuitry, coupling capacitors and emitter bypass capacitor values, -3 dB cut-off frequencies at low and high frequencies, input resistance Zin, output resistance Zout, the maximum voltage swing (no clipping) and the stage voltage gain. Verify your design and output with any suitable computer simulation. The report should have the following items:
(i) Introduction – theory, etc.
(ii) Design:
– Design amplifier circuit calculation both dc and ac analysis.
(iii) Results :
– Expected result based on the design theory.
– Simulation verification results- e.g. input/output waveforms, Bode plot (-3 dB cut-off freq). Analysis and comparison of the results -other necessary waveforms/diagrams.
(iv) Discussion & Conclusion

Get Solution of this Assessment. Hire Experts to solve this assignment for you Before Deadline.

Hire an Expert

The post ECE5882 Design a small-signal midband (for audio signal 20 Hz-20 kHz) common-emitter (CE) amplifier: Advanced Electronic Design Assignment, MU, Malaysia appeared first on Malaysia Assignment Help.

WhatsApp
Hello! Need help with your assignments?

GET FREE ASSIGNMENT HELP

X
Loading...